Análise comparativa do reconhecimento celular de antígenos dos subgêneros de Leishmania na leishmaniose tegumentar americana

Células Mononucleares do sangue periférico (CMSP) oriundas de 28 pacientes que residem em áreas endêmicas para Leishmania braziliensis foram estudados. Destes, 10 encontravam-se na fase ativa da doença e 18 curados clinicamente para as lesões de leishmaniose. As células foram cultivadas frente à antígenos de 6 espécies de Leishmania: Leishmania: L. (V.) braziliensis (LbAg), L. (V.) guyanensis (LgAg), L. (V.) lainsoni (LlAg), L. (V.) naiffi (LnAg), L. (L.) amazonensis (LaAg), L. (L.) chagasi (LcAg) e antígeno de concanavalina A como mitógeno. Os resultados foram expressos em índices de estimulação (IE). Temendo uma possível degradação protéica, os antígenos foram preparados com PBS e com PBS tampão antiproteolítico e o perfil eletroforético foi analisado através de SDS-PAGE. Os sobrenadantes das culturas foram estocados para os ensaios de ELISA para detecção de IFN-γ. A análise do perfil eletroforético dos antígenos de diferentes espécies de Leishmania demonstrou um padrão distinto e heterogêneo e aparentemente, não foi observada degradação assim que os antígenos foram preparados e 10 meses de estoque. Entretanto bandas parecem ser compartilhadas entre as espécies, que podem estar associadas a uma conservação de antígenos entre as espécies de Leishmania. A resposta proliferativa dos linfócitos (RPL) dos pacientes da forma ativa foi mais intensa para LbAg (1710,3), seguido de LnAg (177,6), LaAg (16,89,8) e LlAg (1410,1), e menos intenso para LgAg (11,46,6). Quando os IE obtidos para LbAg foram comparadas com outras espécies observou-se diferenças para LgAg (p<0.004) e LlAg (p<0.03). Não foram encontrados diferenças no perfil protéico dos extratos antigênicos produzidos com e sem inibidores de protease. Os estímulos obtidos de CMSP de indivíduos curados clinicamente não demonstraram diferenças quando comparados com aqueles da fase ativa da doença. O índice de estimulação (médiadesvio padrão) frente estímulos antigênicos pouco variou entre as espécies: LbAg - 22,222,2, LnAg - 15,911,5, LgAg - 20,720,6, LlAg - 14,710,1, LaAg - 15,1114,5 e L. chagasi - 13,78). A produção de IFN-γ quantificada nos sobrenadantes das culturas frente aos antígenos totais e solúvel mostrou níveis da citocina mais elevados quando utilizou-se antígenos total de L. guyanensis (568,1544,5; mediana: 518,5 pg/mL) quando comparadas às outras espécies analisadas. Porém quando analisadas o antígeno solúvel, podemos observar que tanto para os antígenos da espécie L. braziliensis quanto para L. naiffi, a fração total obteve os maiores índices de estímulos quando comparadas com a fração solúvel. Estes estudos sugerem que há uma reatividade cruzada entre as espécies dos subgêneros Viannia e Leishmania.

Cross-correlations between weather variables in Australia

The information on climate variations is essential for the research of many subjects, such as the performance of buildings and agricultural production. However, recorded meteorological data are often incomplete. There may be a limited number of locations recorded, while the number of recorded climatic variables and the time intervals can also be inadequate. Therefore, the hourly data of key weather parameters as required by many building simulation programmes are typically not readily available. To overcome this gap in measured information, several empirical methods and weather data generators have been developed. They generally employ statistical analysis techniques to model the variations of individual climatic variables, while the possible interactions between different weather parameters are largely ignored. Based on a statistical analysis of 10 years historical hourly climatic data over all capital cities in Australia, this paper reports on the finding of strong correlations between several specific weather variables. It is found that there are strong linear correlations between the hourly variations of global solar irradiation (GSI) and dry bulb temperature (DBT), and between the hourly variations of DBT and relative humidity (RH). With an increase in GSI, DBT would generally increase, while the RH tends to decrease. However, no such a clear correlation can be found between the DBT and atmospheric pressure (P), and between the DBT and wind speed. These findings will be useful for the research and practice in building performance simulation.

The mechanical strength of phosphates under friction-induced cross-linking

Purpose: In the present study, we consider mechanical properties of phosphate glasses under high temperatureinduced and under friction-induced cross-linking, which enhance the modulus of elasticity. Design/methodology/approach: Two nanomechanical properties are evaluated, the first parameter is the modulus of elasticity (E) (or Young's modulus) and the second parameter is the hardness (H). Zinc meta-, pyro - and orthophosphates were recognized as amorphous-colloidal nanoparticles were synthesized under laboratory conditions and showed antiwear properties in engine oil. Findings: Young's modulus of the phosphate glasses formed under high temperature was in the 60-89 GPa range. For phosphate tribofilm formed under friction hardness and the Young's modulus were in the range of 2-10 GPa and 40-215 GPa, respectively. The degree of cross-linking during friction is provided by internal pressure of about 600 MPa and temperature close to 1000°C enhancing mechanical properties by factor of 3 (see Fig 1). Research limitations/implications: The addition of iron or aluminum ions to phosphate glasses under high temperature - and friction-induced amorphization of zinc metaphosphate and pyrophosphate tends to provide more cross-linking and mechanically stronger structures. Iron and aluminum (FeO4 or AlO4 units), incorporated into phosphate structure as network formers, contribute to the anion network bonding by converting the P=O bonds into bridging oxygen. Future work should consider on development of new of materials prepared by solgel processes, eg., zinc (II)-silicic acid. Originality/value: This paper analyses the friction pressure-induced and temperature–induced the two factors lead phosphate tribofilm glasses to chemically advanced glass structures, which may enhance the wear inhibition. Adding the coordinating ions alters the pressure at which cross-linking occurs and increases the antiwear properties of the surface material significantly.